PLA Macaron Filament – Pastel Color Shades, 1.75mm, 1kg

PLA Macaron is an easy-to-print PLA offered in soft, pastel-inspired shades. It's built for creative models that benefit from a gentle, coordinated palette and a clean surface. New to choosing filament? Our filament guide for a first print covers where PLA sits among the options.

The difference is the curated macaron palette rather than the base material. You get the same approachable PLA printing behavior, with a softer visual style that suits decorative models, toys, gifts, and multicolor projects. For projects that use it well, see holiday ornaments and gift prints.

Yes. Low warping, straightforward settings, and compatibility with most 1.75mm FDM printers make it a good choice for beginners and experienced users alike. Why PLA is so widely used in desktop FDM workflows explains what makes it so predictable.

PLA Macaron prints a smooth, softly colored surface with a gentle sheen — it isn't the same low-gloss formulation as our PLA Matte range. If you specifically want a non-reflective, layer-line-hiding finish, choose PLA Matte instead. Our guide to silk PLA and why it prints shiny explains how finish is set by the formulation rather than the color.

Use 185–195°C at roughly 50–100 mm/s, or 195–225°C at 100–200 mm/s. Start around 195°C and adjust gradually. A temperature tower will find your printer's exact sweet spot in one print — here's how to read one.

A heated bed at 50–60°C is recommended. On an unheated bed you'll want a suitable adhesive to improve first-layer adhesion. If the first layer is giving you trouble either way, our bed adhesion checklist works through the causes in order.

Compatible printers can reach roughly 200 mm/s once temperature, flow rate, cooling, and acceleration are calibrated. Begin at 50–100 mm/s for dependable results and work up — start with a calibration print rather than raising the speed blind.

No. PLA Macaron prints well without one; good part cooling and normal room ventilation are what matter. Warping 101 explains which materials genuinely need an enclosure and why PLA isn't one of them.

Yes. The shades are designed to coordinate, which makes them well suited to multicolor models, toys, characters, decorative pieces, and personalized gifts. If you're printing them on an AMS or similar unit, see setting up Filazoo filament in your AMS or multi-material system; for manual swaps, changing filament mid-print.

PLA Macaron uses the standard 1.75mm diameter that AMS and other multi-material units expect, and our tolerance is held tight enough for reliable automatic feeding. Our AMS and multi-material setup walkthrough covers getting spools recognized and feeding smoothly. If you have questions about spool dimensions for your specific unit, contact us before ordering.

PLA Macaron is best kept indoors. Like standard PLA it can soften at elevated temperatures and degrades with prolonged outdoor exposure — a pastel planter left in summer sun won't last. For outdoor work, see best weather-resistant filament picks for planters and garden prints.

It's fine for light-duty prototypes, organizers, and general household prints. For parts facing high impact, continuous stress, heat, or outdoor conditions, step up to an engineering material — PA6/ABS vs. ABS/ASA covers our two toughest everyday blends, and PLA+ vs. PLA Basic covers the smaller step up.

Store it in a sealed bag or dry box with fresh desiccant, away from moisture, direct sunlight, and heat. Our guide to filament storage, humidity, and shelf life covers desiccant choice and the humidity level worth aiming for.

Popping sounds, bubbles, heavy stringing, inconsistent extrusion, or a rough surface all point to moisture. Dry at approximately 50°C for 6–8 hours before printing again — our guide to drying filament at home compares ovens, dry boxes, and dedicated dryers.