Foam & Special TPU

Material: Thermoplastic polyurethane (TPU) Filament Diameter: 1.75 mm Shore Hardness: 70A Surface Finish: Foam Nozzle Temperature: 190-250°C Bed Temperature: 20-40°C Print Speed: 20-30 mm/s Recommended Nozzle: 0.4 mm or larger Extruder Type: Direct drive required Drying: 55°C for 6-8 hours Heated Chamber: Not required Storage: Sealed dry storage with desiccant Foaming Control: Temperature and flow dependent Starting Flow Ratio: 60-100%

Material: Thermoplastic polyurethane (TPU) Filament Diameter: 1.75 mm Shore Hardness: 85A Surface Finish: Foam Nozzle Temperature: 190-250°C Bed Temperature: 20-40°C Print Speed: 20-30 mm/s Recommended Nozzle: 0.4 mm or larger Extruder Type: Direct drive required Drying: 55°C for 6-8 hours Heated Chamber: Not required Storage: Sealed dry storage with desiccant Foaming Control: Temperature and flow dependent Starting Flow Ratio: 60-100%

Material: Thermoplastic polyurethane (TPU) Filament Diameter: 1.75 mm Shore Hardness: 90A Surface Finish: Foam Nozzle Temperature: 190-250°C Bed Temperature: 20-40°C Print Speed: 20-30 mm/s Recommended Nozzle: 0.4 mm or larger Extruder Type: Direct drive strongly recommended Drying: 55°C for 6-8 hours Heated Chamber: Not required Storage: Sealed dry storage with desiccant Foaming Control: Temperature and flow dependent Starting Flow Ratio: 60-100%

Material: Thermoplastic polyurethane (TPU) Filament Diameter: 1.75 mm Shore Hardness: 95A Surface Finish: Glow Nozzle Temperature: 220-240°C Bed Temperature: 30-60°C Print Speed: 20-60 mm/s Recommended Nozzle: 0.4 mm or larger Extruder Type: Direct drive recommended Drying: 55°C for 6-8 hours Heated Chamber: Not required Storage: Sealed dry storage with desiccant Nozzle Material: Hardened steel recommended