PLA+ Silk Filament – Reflective Metallic Sheen, 1.75mm, 1kg

PLA+ Silk is a PLA-based filament that prints a smooth, glossy surface with a reflective, metallic-style sheen. It's built for decorative models where appearance is the priority. Silk PLA explained covers why it prints shiny and how to get the most from it.

No. "Silk" describes the smooth, lustrous appearance rather than the ingredients, and metallic-looking shades like Silver, Bronze, Copper, and Gold get their look from pigments, not metal powder. That also means they print like normal PLA — no hardened nozzle needed. Silk PLA explained covers how the effect works.

Both are silk-finish PLA; the "+" refers to the modified base formulation. In practice, treat PLA+ Silk as a decorative filament rather than a functional one — if a part needs real toughness, use our standard PLA+ instead. PLA+ vs. PLA Basic explains what the tougher formulation buys you, and silk PLA explained covers the finish.

It gives a reflective, metallic-style appearance — convincing at a glance, but not identical to polished metal. The result depends on color, geometry, lighting, layer height, temperature, and outer-wall speed. How to get the best finish from Silk PLA covers the settings that maximize it.

Usually low nozzle temperature, too much speed, inconsistent extrusion, or frequent changes in outer-wall speed. Silk needs heat and steady flow to develop its sheen. Start from the recommended profile and change one setting at a time — how to get the best finish from Silk PLA covers what matters most.

Yes. Print speed, layer direction, cooling, model orientation, and how light reaches each face all change the apparent shine — it's normal for one side to look glossier. Keeping outer-wall speed consistent gives the most uniform finish. Silk PLA explained covers why.

They can be. A reflective surface catches layer direction and small variations that a matte finish would hide. A suitable layer height, consistent outer-wall speed, and careful orientation improve it — as does a proper calibration print before the real job.

For light-duty objects, yes, but it's a visual material — don't read the "+" as making it suitable for heavily loaded or safety-critical parts. For those, use standard PLA+ or an engineering material: see PLA+ vs. PLA Basic and PC vs. ABS vs. ASA vs. PETG.

Treat them as equivalent for planning purposes — both are decorative silk filaments, and neither is intended for loaded parts. Real-world strength depends as much on print orientation, wall thickness, infill, temperature, and layer adhesion as on the filament. If strength is the deciding factor, use our standard PLA+ rather than a silk grade.

You can, but sanding dulls or removes the silk sheen. The filament already gives a finished decorative surface, so sanding and painting are usually only worth it for a deliberately customized effect.

Yes. The 15 silk colors combine well for figurines, decorations, gifts, cosplay pieces, and artistic models. Test your color combination first — reflective colors read very differently under different lighting. For AMS setups, see setting up Filazoo filament in your AMS; for project ideas, holiday ornaments and gift prints.